Mechanical and thermal properties and microstructural evolution of Ta-doped Nb4AlC3

(Nb_1-xTa_x)₄AlC₃ (x = 0–0.5) ceramics were prepared by the hot press sintering method. The XRD results show that the second phase (Nb_1-xTa_x)C is formed when the Ta content increases to 25 mol%. The SEM micrographs show that (Nb_1-xTa_x)C has a core/rim structure, whose formation mechanism was also investigated. Substituting some Ta for Nb can significantly improve the mechanical properties of Nb₄AlC₃. (Nb_0.75Ta_0.25)₄AlC₃ exhibits an excellent fracture toughness of 8.3 ± 0.3 MPa m^1/2 at room temperature (RT). The highest Young's modulus (349 ± 16 GPa) and Vickers hardness (4.5 ± 0.3 GPa) at RT are exhibited by the (Nb_0.5Ta_0.5)₄AlC₃ sample, which correlate to increases of 18% and 80%, respectively, compared with those of Nb₄AlC₃. The flexural strengths of (Nb_0.5Ta_0.5)₄AlC₃ are 439 ± 18 MPa at RT and 344 ± 22 MPa at 1100 °C, which correlate to increases of 27% and 45%, respectively, compared with those of Nb₄AlC₃. The solid solution of Ta and the formation of (Nb_1-xTa_x)C are beneficial to the strengthening of Nb₄AlC₃. The coefficient of thermal expansion (CTE) increases slightly from 7.08 × 10⁻⁶ K⁻¹ for Nb₄AlC₃ to 7.24 × 10⁻⁶ K⁻¹ for (Nb_0.75Ta_0.25)₄AlC₃ at 25–1400 °C. The thermal conductivity of (Nb_0.75Ta_0.25)₄AlC₃ (28.4–29.8 W/m·K) is higher than that of Nb₄AlC₃ (18.1–21.2 W/m·K) over the whole test range (25–1000 °C). Owing to their excellent mechanical and thermal properties, Ta-doped Nb₄AlC₃ ceramics have good potential as structural materials.     

Global weak solutions to a spatio-temporal fractional Landau–Lifshitz–Bloch equation

The present paper deals with global existence of weak solutions of a time-space fractional Landau–Lifshitz–Bloch equation involving the weak Caputo derivative and a fractional Laplacian. We use Faedo–Galerkin method with some commutator estimates in order to prove global existence of weak solutions for the model. The uniqueness is also discussed in a special one dimensional case.     

Fully transient analytical solution for degradable organic contaminant transport through GMB/GCL/AL composite liners

In this study, analytical solution for degradable organic contaminant transport through a composite liner consisting of a geomembrane (GMB) layer, a geosynthetic clay liner (GCL) and an attenuation layer (AL) is derived by the separation of variables method. The transient contaminant transport in the whole composite liner can be well described avoiding some weird phenomena in existing analytical solutions. The results of parametric study show that GCL has significant effect on improving the barrier efficiency especially for scenarios with high leachate head. The biodegradation and adsorption in GCL have significant influence on the contaminant transport through the composite liner when the half-life of contaminant in GCL is less than 5 years. Otherwise, the effect can be neglected.     

高强WSTi544221合金组织与性能研究

研究了轧制变形量对WSTi544221合金棒材显微组织和力学性能的影响,并对Φ10 mm规格的棒材进行不同制度的固溶+时效处理,对比了不同热处理状态下棒材的组织和力学性能。结果表明,随着轧制变形量的增大,WSTi544221合金棒材的晶粒细化程度增大,强度逐渐提高,但塑性变化不大。经870℃×1 h/WC+520℃×6 h/AC固溶+时效处理后,强度与塑性可以获得良好匹配,当抗拉强度达到1 610 MPa、屈服强度达到1 531 MPa时,延伸率和断面收缩率可分别保持在12%和43%。     

Impact of Divalent Ions on Heavy Oil Recovery by in situ Emulsification

Many reservoir formation brines are characterized by high salinity and contain high concentrations of divalent ions such as calcium, magnesium, and potassium. These challenging conditions can render the surfactants ineffective during chemical flooding for enhanced heavy oil recovery. Various brine types can have an impact on the stability of emulsions generated with chemicals as chemicals have various resistant levels toward hard divalent ions and salinities. To investigate the impact of brine hardness on heavy oil-in-water emulsion stability, glass tube experiments, microscopic visualization and sandpack flooding experiments, and Hele-Shaw visualization experiments were conducted in this study under low-salinity/hard-brine, high-salinity/hard-brine conditions using commercial chemicals, which are designed for specific reservoir brine conditions. Recovery results demonstrated that complex colloidal solution introduced in the previous study with silica and Dodecyltrimethylammonium bromide (DTAB) along with screened chemicals from glass tube tests in this study can enhance heavy oil recovery significantly with an addition of low concentration of xanthan gum (Lee and Babadagli 2018). The results confirmed the robustness of the complex colloidal solution formula to enhance oil recovery with low concentration of polymer under any reservoir brine conditions. The study also demonstrates the potential of polymer as an emulsion stabilization additive for enhanced heavy oil recovery by in situ emulsion generation. Polymer effects seemed to be particularly dominant under the low-salinity conditions than high-salinity conditions.     

A Novel Formulation of Glucose-Sparing Peritoneal Dialysis Solutions with l-Carnitine Improves Biocompatibility on Human Mesothelial Cells

The main reason why peritoneal dialysis (PD) still has limited use in the management of patients with end-stage renal disease (ESRD) lies in the fact that the currently used glucose-based PD solutions are not completely biocompatible and determine, over time, the degeneration of the peritoneal membrane (PM) and consequent loss of ultrafiltration (UF). Here we evaluated the biocompatibility of a novel formulation of dialytic solutions, in which a substantial amount of glucose is replaced by two osmometabolic agents, xylitol and l-carnitine. The effect of this novel formulation on cell viability, the integrity of the mesothelial barrier and secretion of pro-inflammatory cytokines was evaluated on human mesothelial cells grown on cell culture inserts and exposed to the PD solution only at the apical side, mimicking the condition of a PD dwell. The results were compared to those obtained after exposure to a panel of dialytic solutions commonly used in clinical practice. We report here compelling evidence that this novel formulation shows better performance in terms of higher cell viability, better preservation of the integrity of the mesothelial layer and reduced release of pro-inflammatory cytokines. This new formulation could represent a step forward towards obtaining PD solutions with high biocompatibility.     

Highly disordered ionic distribution in α-dicalcium silicate for structure relaxation

Dicalcium silicate, which is found in steelmaking slag for dephosphorization, exists as the hexagonal α phase at high temperatures. The α-dicalcium silicate forms a solid solution with tricalcium phosphate in the entire composition range, although the reason for high solubility of phosphorus remains unclear in view of the crystal structure. It has previously been reported that the crystal structure of α-dicalcium silicate consists of a symmetric arrangement of Ca²⁺ ions and SiO₄⁴⁻ tetrahedra, although other polymorphs exhibit asymmetric arrangements. However, because the occupation probability of each atomic site in the α polymorph is not limited to unity, it has not been qualified how these ions are exactly arranged. In this study, the ionic distribution in the α polymorph of dicalcium silicate was evaluated by first-principles calculation based on density functional theory (DFT), as well as by molecular dynamics (MD) simulation with a polarizable ion model optimized by DFT calculation. The results indicated that the completely symmetric ionic arrangement, as reported for the α phase, is the most unstable. Electronic-state calculation and MD simulation indicated that a highly disordered ionic arrangement spontaneously forms in the α-phase crystal for structure relaxation when held at high temperatures, or when phosphorus is incorporated.